Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1967-1969 F-Body LS Swap Kit Parts

LS swap parts for the 1967-1969 Camaro and Firebird: the Muscle Rods conversion kit, mounts and Sure-Fit crossmember, mid-length headers, EFI fuel tanks including notched tanks for mini tubs, aluminum radiators, oil pans and a rear shock inboard relocation kit.

  • Made in the USA
  • Bolts to factory holes, no drilling
  • Sure-Fit crossmember for many transmissions

Open the 1967-1969 F-Body LS install guide or build your swap.

EFI fuel tanks

Notched EFI fuel tanks for mini tubs

Radiators

Oil pans

Suspension

What comes in the 1967-1969 F-Body LS conversion kit

  • Driver and passenger engine mounts
  • Driver and passenger frame mounts
  • Transmission crossmember
  • 2 crossmember brackets
  • Polyurethane transmission mount
  • Transmission mount spacers, quantity set by your transmission
  • Hardware pack

1st gen Camaro LS swap fitment notes

  • No tunnel changes on 1967-1969 Camaro and Firebird with a 4L60E, 4L80E, TH350, TH400 or 700R4. A T-56, 6L80, 6L90 or TR6060 may need tunnel work.
  • The install guide says these kits and headers are designed for the GM LH8 oil pan.
  • To run A/C, use a top-mount A/C bracket.
  • The mid-length headers have a ball and socket collector and clear the factory A/C box, power steering box and power brakes.
  • Pairing a 4L80 with the mid-length headers means trimming the bell housing tabs.
  • Frame mounts and the crossmember bolt to factory mounting holes with no drilling or changes.
  • Some 1969 Firebirds used heavy-duty steering parts that may need to be swapped for the Camaro parts.
  • The original clutch Z-bar cannot be reused, and driveshaft length changes.

Notes from the 1967-1969 F-Body LS install guide.

1st gen Camaro LS swap FAQ

Which cars does the 1967-1969 F-Body LS kit fit?

The LSX1 kit fits 1967-1969 Camaro and Firebird. The mount kit and Sure-Fit crossmember are also named for 1968-1974 X-Body.

Do I need to modify the transmission tunnel?

Not with a 4L60E, 4L80E, TH350, TH400 or 700R4. A T-56, 6L80, 6L90 or TR6060 may need tunnel work.

Which transmissions work with the mid-length headers?

TH350, TH400, Muncie, 700R4, T-56, 4L60E, 4L65E, 4L80E, 6L80, 6L90 and TR6060. With a 4L80, the bell housing tabs are trimmed for clearance.

What are the notched fuel tanks for?

The notched 1967-1968 and 1969 tanks are made for cars with mini tubs. Each tank kit comes with a 255 LPH pump, good for up to 550 hp, or a 400 LPH pump for more.