Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1977 - 1990 B-body LS Exhaust Accessories

Box Chevy LS exhaust hardware for the 1977-1990 Caprice and 1977-1985 Impala: band clamps in 2-1/2 and 3 inch stainless, cone reducers that neck 3 inch pipe to 2-1/2 inch, an O2 sensor band clamp for 3 inch tubing, and stainless steel header bolts.

  • 2-1/2 and 3 inch band clamps
  • Pair of 3 to 2-1/2 inch reducers
  • O2 clamp for 3 inch pipe

Box Chevy mid-length and long tube headers, the Sure-Fit crossmember and mounts are on the 1977-1990 B-Body LS swap page, and BRP lists the whole exhaust range under exhaust components.

Box Chevy LS exhaust accessories

Caprice and Impala clamps and reducers

O2 sensor clamp and header hardware

Box Chevy exhaust parts by use

  • Connecting 2-1/2 inch sections: 2-1/2 inch stainless clamp
  • Connecting 3 inch sections: 3 inch stainless clamp
  • Reducing a 3 inch outlet to 2-1/2 inch: reducer pair
  • Mounting an O2 sensor on 3 inch tube: O2 band clamp

1977-1990 B-Body header notes

  • The guide says the stock column shift linkage clears the mid-length headers and lines up with the 4L60E shift shaft.
  • Going long tube means taking out the front crossmember frame brace; with mid-length headers the brace stays.
  • The starter has to come off to install the headers.
  • LH8 oil pan works at stock ride height; the guide recommends the BRP Moroso High Clearance pan for lowered cars.

Notes from the 1977-1990 B-Body LS install guide. Part sizes come from the product names.

Box Chevy LS exhaust FAQ

Mid-length or long tube headers for a 1977-1990 Caprice LS swap?

Both are listed on the 1977-1990 B-Body LS page. The guide says long tubes need the front crossmember frame brace removed, while mid-lengths do not.

Will my column shifter clear the headers in a Box Chevy?

The guide says the stock column shift linkage clears the mid-length headers and lines up with the 4L60E shift shaft.

Does the starter stay on when fitting headers to a 77-90 Impala?

No. The guide says the starter must be removed to install headers.

What size clamp do I need on a Caprice exhaust?

Match the pipe: the 2-1/2 inch clamp for 2-1/2 inch tube or the 3 inch clamp for 3 inch tube. Use the reducers where 3 inch steps down to 2-1/2 inch.