Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1982 - 1992 F-Body LS Transmission Mount Adapters

Third gen Camaro and Firebird owners swapping in an LS with a late GM gearbox can use these four BRP adapters. They let a TR-6060, CTS-V T-56, MG9, 6L90E, 8L90E or 10L90E sit on a standard transmission mount.

  • No tunnel modifications, per the guide
  • Crossmember bolts in with factory holes
  • Specify your transmission when ordering

Read the 1982-1992 F-Body LS install guide for the T-56 clearance grind and V6 K-member note. Mounts and radiators are on the 1982-1992 F-Body LS swap page.

Pick by gearbox

  • Standard Camaro TR-6060 or CTS-V T-56: the jig welded steel bracket with hardware.
  • The CTS-V MG9 high-torque six speed gets a dedicated adapter.
  • For a 6L90E pulled from a 2009-2014 CTS-V, choose the 6L90E adapter.
  • Running an 8L90E or 10L90E? Both tailshafts take the same adapter.

1982-1992 F-Body transmission notes

  • BRP lists the 1984-1992 F-Body Crossmember for 1984-1992 Camaro and Firebird.
  • BRP builds different third gen crossmembers by transmission, so name yours on the order.
  • The 1982-1992 guide says no transmission tunnel modifications are needed.
  • On a T-56, a casting boss on the tailshaft has to be ground down to clear the BRP crossmember.
  • The crossmember goes in with 10mm bolts and the transmission mount takes a 7/16 inch bolt.
  • Built for the factory V8 K-member. A V6 K-member means marking and drilling the engine mount holes.

Notes from the 1982-1992 F-Body LS install guide.

3rd gen Camaro LS transmission mount adapter FAQ

Do I have to cut the tunnel in a third gen Camaro for an LS transmission?

The 1982-1992 F-Body guide says no tunnel modifications are required. It only discusses the T-56, 4L60E and 4L65E by name.

Why does BRP ask which transmission I have?

The guide says the third gen crossmembers are different for each transmission, so the order needs to state it.

Does a T-56 bolt straight up to the BRP crossmember?

Almost. A casting boss on the T-56 tailshaft needs grinding for clearance.

Is there an adapter for the 8L90E or 10L90E?

Yes, one adapter covers both tailshaft housings and is meant to be used with BRP crossmembers.