Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1982 - 2005 S-10 Blazer 2WD LS Accessory Drives

Front accessory drives for a 2WD S-10 Blazer or S-15 Jimmy with an LS. This page carries the Short balancer length only: a High Mount A/C drive that comes with its compressor, an alternator and power steering drive, and that drive with a pump.

  • Short balancer length only
  • A/C drive ships with a compressor
  • w/Pump version adds the steering pump

The S10 2WD guide says the small engine bay needs high-mount accessories. Read the 1982-2003 S10 2WD LS install guide, or go back to the 1982-2005 S-10 Blazer 2WD LS swap page for mounts, crossmember and fuel parts.

S-10 Blazer 2WD LS accessory drive parts

Blazer A/C drive

Blazer alternator and steering drives

Back to the Blazer swap

S10 2WD guide accessory notes

  • High-mount accessories are a must in this chassis, per the S10 2WD guide.
  • A stock low-mount A/C compressor will not work unless the frame is heavily modified.
  • Factory LS F-Body and GTO accessory systems cannot be used here.
  • Camaro and truck LS accessories sit further forward and can interfere with the radiator and fan.

Notes from the 1982-2003 S10 2WD LS install guide, written for S10 2WD trucks. Drive types and the Short length come from the product names.

S-10 Blazer LS accessory drive FAQ

Can my 2WD Blazer keep a low-mount LS A/C compressor?

Not without heavy frame work, says the S10 2WD guide. Plan on a high-mount A/C setup like the drive on this page.

Why does this Blazer page only show Short drives?

Short is the only length BRP lists in this category. Check the balancer on your engine before ordering.

Will truck LS accessories fit an S-10 Blazer?

The guide warns that Camaro and truck LS accessories stick out further and can hit the radiator and fan.