Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1965 - 1970 B-Body LS Exhaust Accessories

Clamps, reducers and bolts for the exhaust on a 1965-1970 Impala or Caprice that now runs an LS. Pick 2-1/2 or 3 inch stainless band clamps, the 3 to 2-1/2 inch cone reducers, a 3 inch band clamp that doubles as an O2 sensor mount, or a set of stainless header bolts.

  • Stainless band clamps
  • 3 inch O2 sensor clamp
  • Reducers sold as a pair

The 1-7/8 inch ceramic coated long tube and mid-length headers made for the 1965-1970 B-Body, along with cast iron manifolds and the mount kit, are listed on the 1965-1970 B-Body LS swap page. Browse every BRP exhaust part at exhaust components.

1965-1970 Impala and Caprice LS exhaust accessories

Band clamps and cone reducers

Sensor clamp and header bolts

1965-1970 B-Body: picking the right piece

  • Slip joint in 2-1/2 inch pipe: 2-1/2 inch clamp
  • Slip joint in 3 inch pipe: 3 inch clamp
  • Collector at 3 inch, pipe at 2-1/2: reducers
  • Sensor needed in 3 inch pipe: O2 band clamp

1965-1970 B-Body swap notes

  • The long tube header listing names the 1965-1970 Chevrolet Impala and Caprice.
  • With a 4L60E, 4L65E, 4L70E or 4L75E the crossmember sits on the factory frame brackets after one added hole, per the guide.
  • A 4L80E, 6L80E, 6L90E, 8L90E or 6 speed manual moves the crossmember rearward onto new brackets that come in the kit.
  • The B-Body guide does not cover header clearance, so check the header listing for details.

Swap notes from the 1965-1970 B-Body LS install guide; header fitment from the product listing. Part sizes come from the product names.

1965-1970 B-Body LS exhaust FAQ

Does BRP make LS headers for a 1965-1970 Impala?

Yes. A 1-7/8 inch long tube and a 1-7/8 inch mid-length header, both ceramic coated, are listed for the 1965-1970 B-Body on the parent swap page.

Do the 65-70 B-Body long tube headers fit a Caprice too?

The long tube listing names both the 1965-1970 Impala and the 1965-1970 Caprice.

Does transmission choice change the crossmember spot on a 1967 Impala LS swap?

Yes. The 4L60E family uses the factory brackets with one new hole, while longer gearboxes such as the 4L80E or a 6 speed manual move it back onto added brackets.

What closes a 3 inch to 2-1/2 inch step in a B-Body exhaust?

A 3 to 2-1/2 inch cone reducer with a band clamp at each end, one 3 inch and one 2-1/2 inch.