Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1988 - 1998 2WD GM Truck LS Accessory Drives

Accessory drives for an LS in a 1988-1998 2WD Chevy or GMC C1500. The truck guide is blunt about A/C: no low mount compressor of any kind clears the frame, so you need a high mount A/C kit. It also says LS truck style alternator and power steering fit this chassis well, which keeps the swap simple if you skip A/C.

  • Low mount A/C will not clear
  • LS truck alternator and steering fit
  • High Mount A/C drives w/Compressor

Mounts, the Sure-Fit crossmember and pump kits are on the 1988-1998 2WD GM truck LS page. The 1988-1998 2WD GM truck LS install guide has the full chassis notes.

C1500 drives that include the steering pump

Each name ends in Short, Medium or Long for the balancer it suits. Look at the balancer on the LS going into your truck, then order that length.

More for the 2WD truck swap

1988-1998 2WD truck accessory notes

  • Any low mount A/C compressor hits the C1500 frame, so A/C means a high mount kit.
  • A factory LS truck alternator and power steering setup is listed in the guide as a good fit.
  • The factory LS truck mechanical fan lines up with the stock fan shroud in this truck.
  • The kit is built around the LH8 oil pan; a truck pan hangs about 1 inch below the frame.

Notes from the BRP 1988-1998 2WD GM truck LS install guide. Drive types and lengths come from the product names.

1988-1998 C1500 LS accessory drive FAQ

Can I use a low mount A/C compressor on an LS in a C1500?

No. The guide says low mount compressors of any kind will not clear the frame and a high mount A/C kit is required.

Will a truck LS alternator and power steering pump fit my OBS truck?

The guide says LS truck style alternator and power steering fit nicely in the 1988-1998 2WD chassis.

Does the High Mount A/C drive come with a compressor?

Yes. Each High Mount AC Compressor Drive on this page is sold w/Compressor.

Short, Medium or Long for a C1500 swap?

Pick the length that matches your balancer. BRP does not list which engines use each one.