1973 - 1987 2WD GM Truck LS Hose & Line Kits

Steering hose kit for the LS pump

• Power Steering Hose Kit

Back to the square body swap

• 1973-1987 2WD GM truck LS swap parts
• Hose and line kits for every swap

What comes in the truck line kits

• Both fuel kits use PTFE lined stainless braided hose with a black cover, plus clamps, fittings and connectors.
• The 255 LPH kit uses an OE style filter and regulator in one housing that holds the GM LS figure of 58 psi.
• The 400 LPH kit carries its own filter and an adjustable regulator with a vacuum and boost port.
• Steering kit: a braided high pressure supply line plus a nylon low pressure return.

1973-1987 2WD truck line fitment notes

• C10 and C15 tanks come for 6 foot and 8 foot beds, and the Blazer, Jimmy and Suburban tank is separate. Each comes with a 255 or 400 LPH pump.
• A 255 LPH truck tank takes 6601-00. A 400 LPH truck tank takes 6605-00. Both kits are made for returnless rails.
• The guide sets the crossmember outer brackets fore or aft to suit your transmission, so route cooler lines once it is in place.
• Running a low mount A/C compressor? The guide says it needs custom made A/C lines, which are not part of these kits.

Notes from the 1973-1987 2WD GM truck LS install guide. Kit contents and tank pump sizes come from BRP product names and descriptions.

1973-1987 C10 LS hose and line FAQ