Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1967 - 1969 F-Body LS Accessory Drives

LS accessory drives for a first generation Camaro or Firebird, 1967 through 1969. BRP states that A/C in this car has to run on a top mount bracket, so a first gen with air should start with the High Mount A/C drives, which come with the compressor. Cars without air can use the alternator and power steering drive, with or without the pump.

  • A/C needs a top mount bracket
  • A/C drives ship with a compressor
  • Short, Medium or Long balancer

Mounts, crossmember, headers and tanks for the first gen are on the 1967-1969 F-Body LS page. Notes below are from the 1967-1969 F-Body LS install guide.

First gen drives with a power steering pump

Each name closes with the balancer length the drive is built around. Check the balancer on your first gen LS before you pick one.

More for the first gen swap

1967-1969 F-Body notes near the front of the engine

  • To run A/C on a first gen LS, the guide says a top mount A/C bracket must be used.
  • BRP headers for the first gen clear the factory A/C box, power steering box and power brakes.
  • The first gen kit and headers are built for the GM LH-8 oil pan.
  • The BRP machined pan kit is meant for engines with variable valve timing or displacement on demand.

Notes from the BRP 1967-1969 F-Body LS install guide. Drive types and balancer lengths come from the product names.

1967-1969 Camaro LS accessory drive FAQ

Can I keep air conditioning in a 1967-1969 Camaro or Firebird LS swap?

Yes, on a top mount bracket. The first gen guide says one must be used to run A/C, and the High Mount A/C drives here include the compressor.

Do I need the w/Pump version for my first gen?

Only if you are not supplying a power steering pump. The w/Pump drive adds one; the base drive leaves it to you.

Which oil pan goes with a first gen Camaro LS swap?

The guide says the kit and headers are designed for the GM LH-8 pan, with the BRP machined pan kit for VVT or DOD engines. It does not tie the pan to a drive.

How do I choose Short, Medium or Long for a 1967-1969 F-Body?

Go by your balancer. BRP does not publish which LS engines take each length.