Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1984-1996 Corvette LS Swap Kit Parts

LS swap parts for the C4 Corvette: the Muscle Rods 1984-1991 conversion kit, engine mounts, C-beam brackets for T-56 and 4L60E, aluminum radiators and in-tank fuel pump kits.

  • Made in the USA conversion kits
  • Fits T-56 and 4L60E to 4L75E
  • Keeps the block in the stock location

Planning a C4 swap? Read the 1984-1991 Corvette LS install guide first.

Fuel pump kits

Oil system

What comes in the C4 Corvette LS conversion kit

  • 2 motor mounts
  • C-beam bracket
  • Engine mount bolt kit
  • C-beam bolt kit

C4 Corvette LS swap fitment notes

  • Use the factory GM 1998-2002 F-body LS oil pan. Other pans are too deep at the front to clear the frame.
  • LS transmissions that work: 1998-2002 F-body T-56 and T-56 Magnum, or 4L60E, 4L65E, 4L70E and 4L75E automatics.
  • The mounts put the back of the block in the stock location, so the factory ZF 6-speed can be kept with extra parts listed in the guide.
  • Use a car-style intake. A truck intake is too tall for the stock hood.
  • Low-mount alternators and low-mount A/C compressors do not clear the frame.
  • A T-56 needs the C-beam shortened and new holes drilled. 4L60E through 4L75E need no C-beam changes.

Notes from the 1984-1991 Corvette LS install guide.

C4 Corvette LS swap FAQ

Which years does the C4 LS conversion kit fit?

The LSX31 conversion kit fits 1984-1991 Corvettes. Radiators and C-beam brackets on this page are listed for their own years, so check each product.

Which oil pan does a C4 LS swap need?

The factory GM 1998-2002 F-body LS oil pan. Other pans sit too deep at the front to clear the frame. The kit does not include an oil pan.

Can I keep my ZF 6-speed?

Yes. The mounts keep the block in the stock location. The install guide lists the extra bell housing and throw-out bearing parts needed.

Will an LS truck intake fit under the hood?

No. Use a car-style intake manifold. A truck intake is too tall for the stock hood.