LS accessory drives for 1978-1988 G-Body swaps. Choose an alternator and power steering drive, the same drive with a power steering pump included, or a high-mount A/C compressor drive that ships with the compressor. Every drive is offered in Short, Medium and Long balancer lengths, so order the length that matches the balancer on your LS.
Running A/C in your G-Body? The 1978-1988 G-Body LS install guide has a note on low-mount compressor line clearance. Need mounts, crossmember and headers too? See the G-Body LS swap page.
The plain alternator and power steering drive carries the alternator and leaves the pump up to you. The w/Pump version adds a power steering pump.
The high-mount drive places the compressor up top and includes the compressor itself.
Short, Medium and Long describe the balancer length each drive is built around. Pick the one that matches the balancer on your engine.
Chassis notes come from the BRP 1978-1988 G-Body LS install guide. Drive details come from the product names.
This page lists all nine BRP LS drives for the G-Body: alternator and power steering, the same with a pump, and high-mount A/C with compressor, each in Short, Medium and Long.
The G-Body guide says the 1998-2002 F-Body low-mount compressor may need the frame notched for A/C line clearance. The high-mount A/C drive is the other route.
The guide confirms that BRP headers clear the factory A/C box, power steering box and power brakes. It does not list drive clearances beyond the A/C line note.
The length is the balancer length the drive is made for. Check the balancer and water pump on your LS and order the length that matches it.
© 2026 . All Rights Reserved. Powered by Miva