Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

Multi-Fit LS Engine Mount Kit


new
Multi-Fit LS Engine Mount Kit
Purchase Multi-Fit LS Engine Mount Kit
  • Multi-Fit LS Engine Mount Kit

  • $129.00

    SKU: 213-1302-00

Precision LS Motor Mounts for 73-98 GM A, F, B Platforms

For seamless LS engine installations on 1973 to 1998 GM A, F and B bodies, the Multi-Fit Engine Mount Kit delivers precision clamshell frame alignment and integrates with SureFit crossmember kits for a secure factory standard fit. Robust mild steel meets OEM Chevrolet clamshell frame standards and resists corrosion with a durable powder coat finish for lasting reliability. By accommodating mid length headers and precise engine positioning, these mounts simplify installation, eliminate alignment guesswork and leverage MuscleRods USA manufacturing and support for dependable performance.

Multi-Fit LS Engine Mount Kit for Universal Swap Applications

Getting an LS mill to seat correctly in a classic GM chassis can turn into a headache without the right mounts. This Multi-Fit Engine Mount Kit replicates OEM Chevrolet clamshell frame interfaces, letting you position the block with factory accuracy. Constructed from mild steel and finished with a textured powder coat, it resists corrosion and handles the stresses of daily driving. Integration with Sure-Fit crossmember kits and clearance for mid length headers come built into the design, reducing trial and error during installation.

Exact OEM Clamshell Frame Interface for Precise LS Block Positioning

By faithfully replicating the Chevrolet clamshell mount design, this engine mount kit ensures the block is located exactly where GM intended. That accurate interface eliminates the need for custom brackets or spacers and prevents misalignment that can cause premature wear on drive components. Installers benefit from factory keyed mounting points that maintain correct engine and transmission alignment under load. Reduced vibration and smoother driveline angles are achieved through this precision fit. Integrating the block square to the frame also simplifies hookup of accessories and lowers the risk of clearance issues during assembly.

Robust Mild Steel Construction with Corrosion-Resistant Powder Coat Finish

Each bracket is formed from high-yield mild steel chosen for its balance of strength and ductility under torsional stress. After welding, the assemblies receive a uniform powder coat finish that seals out moisture, road salts, and abrasion in harsh engine bay environments. This protective layer also delivers a consistent surface that resists chipping and is easy to wash clean during regular maintenance. Together, the steel and coating provide a durable mounting foundation that will withstand the torque cycles of daily driving or spirited use. Proudly made in the USA, these mounts offer reliable support for every swap project.

Seamless Integration with Sure-Fit Crossmember and Mid Length Header Packages

The mounting geometry is calibrated to align with our Sure-Fit crossmember systems for consistent ground clearance and firewall setback across multiple GM chassis. In addition, the design accommodates mid length exhaust headers without any interference, preserving optimal exhaust flow and preventing unwanted contact. This unified approach reduces the trial and error that often plagues custom installations, delivering a cleaner engine bay and a faster build process. By matching engine height and lateral position, all connected components-from transmission lines to steering couplers-fit together without the need for last-minute adjustments. The result is a swap that installs correctly the first time.

Count on the Multi-Fit Engine Mount Kit for precise block placement and enduring support in your LS swap project.

Specifications

  • SKU: 213-1302-00
  • Swap Engine: LS
  • Brand: Muscle Rods
  • Material: Mild Steel
  • What's Included:
    • Set of clamshell engine mounts
    • Installation hardware
  • Finish: Powder-Coated

Key Features

  • Multi-fit design for OEM Chevrolet clamshell frame mounts
  • Seamless compatibility with Sure-Fit crossmember kits
  • Supports installation of mid-length exhaust headers
  • Built from durable mild steel construction
  • Powder coated finish for corrosion resistance and appearance
  • Proudly manufactured in the United States

Benefits

  • Ensures precise fit on OEM Chevrolet clamshell frames
  • Integrates effortlessly with Sure-Fit crossmember kits
  • Accommodates mid-length headers for optimized exhaust clearance
  • Delivers robust support thanks to durable mild steel construction
  • Provides corrosion resistance and lasting looks via powder coating
  • Built in the USA for superior quality and long-lasting durability

This Item Assigned to Category and Also Fits:

Description

Multi-Fit LS Engine Mount Kit for Universal Swap Applications

Getting an LS mill to seat correctly in a classic GM chassis can turn into a headache without the right mounts. This Multi-Fit Engine Mount Kit replicates OEM Chevrolet clamshell frame interfaces, letting you position the block with factory accuracy. Constructed from mild steel and finished with a textured powder coat, it resists corrosion and handles the stresses of daily driving. Integration with Sure-Fit crossmember kits and clearance for mid length headers come built into the design, reducing trial and error during installation.

Exact OEM Clamshell Frame Interface for Precise LS Block Positioning

By faithfully replicating the Chevrolet clamshell mount design, this engine mount kit ensures the block is located exactly where GM intended. That accurate interface eliminates the need for custom brackets or spacers and prevents misalignment that can cause premature wear on drive components. Installers benefit from factory keyed mounting points that maintain correct engine and transmission alignment under load. Reduced vibration and smoother driveline angles are achieved through this precision fit. Integrating the block square to the frame also simplifies hookup of accessories and lowers the risk of clearance issues during assembly.

Robust Mild Steel Construction with Corrosion-Resistant Powder Coat Finish

Each bracket is formed from high-yield mild steel chosen for its balance of strength and ductility under torsional stress. After welding, the assemblies receive a uniform powder coat finish that seals out moisture, road salts, and abrasion in harsh engine bay environments. This protective layer also delivers a consistent surface that resists chipping and is easy to wash clean during regular maintenance. Together, the steel and coating provide a durable mounting foundation that will withstand the torque cycles of daily driving or spirited use. Proudly made in the USA, these mounts offer reliable support for every swap project.

Seamless Integration with Sure-Fit Crossmember and Mid Length Header Packages

The mounting geometry is calibrated to align with our Sure-Fit crossmember systems for consistent ground clearance and firewall setback across multiple GM chassis. In addition, the design accommodates mid length exhaust headers without any interference, preserving optimal exhaust flow and preventing unwanted contact. This unified approach reduces the trial and error that often plagues custom installations, delivering a cleaner engine bay and a faster build process. By matching engine height and lateral position, all connected components-from transmission lines to steering couplers-fit together without the need for last-minute adjustments. The result is a swap that installs correctly the first time.

Count on the Multi-Fit Engine Mount Kit for precise block placement and enduring support in your LS swap project.

Features
  • Multi-fit design for OEM Chevrolet clamshell frame mounts
  • Seamless compatibility with Sure-Fit crossmember kits
  • Supports installation of mid-length exhaust headers
  • Built from durable mild steel construction
  • Powder coated finish for corrosion resistance and appearance
  • Proudly manufactured in the United States
Benefits
  • Ensures precise fit on OEM Chevrolet clamshell frames
  • Integrates effortlessly with Sure-Fit crossmember kits
  • Accommodates mid-length headers for optimized exhaust clearance
  • Delivers robust support thanks to durable mild steel construction
  • Provides corrosion resistance and lasting looks via powder coating
  • Built in the USA for superior quality and long-lasting durability
What's Included
  • Set of clamshell engine mounts
  • Installation hardware
Specifications
  • SKU: 213-1302-00
  • Brand: Muscle Rods
  • Swap Engine: LS
  • Material: Mild Steel
  • Finish: Powder-Coated