Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1964-1967 Skylark EFI Fuel Tank Kit - 400 LPH Pump


1964-1967 Skylark EFI Fuel Tank Kit - 400 LPH Pump
Purchase 1964-1967 Skylark EFI Fuel Tank Kit - 400 LPH Pump
  • 1964-1967 Skylark EFI Fuel Tank Kit - 400 LPH Pump

  • $649.00

    SKU: 101-6681-06

Walbro 400 LPH EFI Fuel Tank Kit for 1964-1967 Skylark LS LT

Designed for seamless LS and LT engine conversions on 1964 through 1967 Skylark models, the Skylark EFI Fuel Tank Kit integrates a Walbro 400 LPH pump and precision fuel level sender with OEM style straps and vent filter to maintain classic Buick appeal while delivering consistent pressure even under extreme performance demands. All necessary gaskets and installation hardware are included for a truly direct fit installation, and every component is proudly made in America to support domestic craftsmanship and fuel confidence on the road from the first start to peak acceleration.

LS and LT Engine EFI Fuel Tank Kit for 1964-1967 Buick Skylark

Swapping an LS or LT powerplant into a first generation Skylark often hinges on securing stable fuel pressure during spirited runs. This EFI fuel tank kit solves that by fitting a Walbro 400 LPH pump inside the original reservoir while preserving every factory mounting point and stock filler location. A calibrated level sender ties directly into the existing gauge harness to maintain accurate fuel readings across the full tank capacity. Complete gaskets, straps and a vent filter arrive ready to install so classic lines remain intact while delivering reliable flow for high horsepower or forced induction setups.

Classic Tank Conversion Preserves Skylark Aesthetics

By retaining every factory mounting point and the original filler location, the kit transforms the stock reservoir into a modern fuel delivery unit without altering body panels. The internal module slips directly into the existing cavity, ensuring that the car's low stance and smooth profile remain intact. Technicians find that the bolt patterns and clearance match the Buick's original design, so no cutting or welding is required during installation. This approach lets builders enjoy updated functionality while keeping the vehicle's period correct appearance intact.

400 LPH Walbro Pump Ensures Consistent Fuel Pressure

The included pump delivers 400 liters per hour to support engines that exceed five hundred fifty horsepower or run on forced induction. Mounted inside the tank, the pump stays submerged to reduce the risk of vapor lock during hard acceleration or sustained track runs. This configuration also minimizes turbulence, providing a steady flow at high engine speeds and stable pressure under heavy fuel demand. The result is reliable performance whether you are cruising or pushing the engine to its limits.

Calibrated Sending Unit Maintains Gauge Precision

The fuel level sender is shaped to match the internal contours of the Buick tank, eliminating the common dead spots that can confuse ordinary gauges. Its calibrated float arm interfaces directly with the factory wiring harness, offering a plug and play experience without the need for splices or adapters. That direct integration preserves the dashboard layout and ensures that readouts remain accurate across the entire fuel range. Drivers can trust their gauge and plan fueling stops with confidence.

Factory Hardware Delivers Secure Seal and Ventilation

Every strap, gasket and vent filter in the kit meets the original Buick specifications to ensure a precise fit and secure seal. The tank straps align with the frame's factory points, while the molded gaskets resist fuel seepage under all conditions. A period correct vent filter safeguards against debris entry and maintains proper tank ventilation during operation. By including gaskets, filler neck components and all necessary fasteners, the kit streamlines the installation process and avoids last minute trips for missing parts.

This kit delivers a precise fit and dependable flow. To complement your Smaller capacity fuel pump Kit at 255 LPH consider our 1964-1967 Skylark EFI Fuel Tank Kit - 255 LPH Pump.

Fitment

  • 1964-1967 Buick Skylark

Specifications

  • SKU: 101-6681-06
  • Swap Engine: LS, LT
  • Brand: Muscle Rods
  • What's Included:
    • 400 LPH Walbro fuel pump (for supercharged or over 550 HP applications)
    • In-tank tuel pump module
    • Sending unit
    • Tank straps
    • Filler neck
    • Vent filter
    • Gaskets
    • Hardware

Key Features

  • EFI Conversion Fuel Tank kit for 1964-1967 Buick Skylark and Gran Sport
  • High-flow Walbro 400 LPH in-tank pump for supercharged or over 550 HP applications
  • Precision fuel level sender for factory gauge compatibility
  • OEM-style tank straps and vent filter
  • All required gaskets and installation hardware included
  • Proudly made in America

Benefits

  • Ensures reliable fuel delivery under extreme performance demands
  • Supports high-horsepower and supercharged engine setups
  • Provides accurate fuel level readings for confidence on the road
  • Simplifies installation with direct-fit components
  • Preserves classic appearance while upgrading functionality
  • Helps sustain American manufacturing jobs

This Item Assigned to Category and Also Fits:

Description

LS and LT Engine EFI Fuel Tank Kit for 1964-1967 Buick Skylark

Swapping an LS or LT powerplant into a first generation Skylark often hinges on securing stable fuel pressure during spirited runs. This EFI fuel tank kit solves that by fitting a Walbro 400 LPH pump inside the original reservoir while preserving every factory mounting point and stock filler location. A calibrated level sender ties directly into the existing gauge harness to maintain accurate fuel readings across the full tank capacity. Complete gaskets, straps and a vent filter arrive ready to install so classic lines remain intact while delivering reliable flow for high horsepower or forced induction setups.

Classic Tank Conversion Preserves Skylark Aesthetics

By retaining every factory mounting point and the original filler location, the kit transforms the stock reservoir into a modern fuel delivery unit without altering body panels. The internal module slips directly into the existing cavity, ensuring that the car's low stance and smooth profile remain intact. Technicians find that the bolt patterns and clearance match the Buick's original design, so no cutting or welding is required during installation. This approach lets builders enjoy updated functionality while keeping the vehicle's period correct appearance intact.

400 LPH Walbro Pump Ensures Consistent Fuel Pressure

The included pump delivers 400 liters per hour to support engines that exceed five hundred fifty horsepower or run on forced induction. Mounted inside the tank, the pump stays submerged to reduce the risk of vapor lock during hard acceleration or sustained track runs. This configuration also minimizes turbulence, providing a steady flow at high engine speeds and stable pressure under heavy fuel demand. The result is reliable performance whether you are cruising or pushing the engine to its limits.

Calibrated Sending Unit Maintains Gauge Precision

The fuel level sender is shaped to match the internal contours of the Buick tank, eliminating the common dead spots that can confuse ordinary gauges. Its calibrated float arm interfaces directly with the factory wiring harness, offering a plug and play experience without the need for splices or adapters. That direct integration preserves the dashboard layout and ensures that readouts remain accurate across the entire fuel range. Drivers can trust their gauge and plan fueling stops with confidence.

Factory Hardware Delivers Secure Seal and Ventilation

Every strap, gasket and vent filter in the kit meets the original Buick specifications to ensure a precise fit and secure seal. The tank straps align with the frame's factory points, while the molded gaskets resist fuel seepage under all conditions. A period correct vent filter safeguards against debris entry and maintains proper tank ventilation during operation. By including gaskets, filler neck components and all necessary fasteners, the kit streamlines the installation process and avoids last minute trips for missing parts.

This kit delivers a precise fit and dependable flow. To complement your Smaller capacity fuel pump Kit at 255 LPH consider our 1964-1967 Skylark EFI Fuel Tank Kit - 255 LPH Pump.

Fitment

Fitment

  • 1964-1967 Buick Skylark
Features
  • EFI Conversion Fuel Tank kit for 1964-1967 Buick Skylark and Gran Sport
  • High-flow Walbro 400 LPH in-tank pump for supercharged or over 550 HP applications
  • Precision fuel level sender for factory gauge compatibility
  • OEM-style tank straps and vent filter
  • All required gaskets and installation hardware included
  • Proudly made in America
Benefits
  • Ensures reliable fuel delivery under extreme performance demands
  • Supports high-horsepower and supercharged engine setups
  • Provides accurate fuel level readings for confidence on the road
  • Simplifies installation with direct-fit components
  • Preserves classic appearance while upgrading functionality
  • Helps sustain American manufacturing jobs
What's Included
  • 400 LPH Walbro fuel pump (for supercharged or over 550 HP applications)
  • In-tank tuel pump module
  • Sending unit
  • Tank straps
  • Filler neck
  • Vent filter
  • Gaskets
  • Hardware
Specifications
  • SKU: 101-6681-06
  • Brand: Muscle Rods
  • Swap Engine: LS, LT