Complete MuscleRods LT Engine Swap Kit for 1967-1969 F-Body (Camaro/Firebird)
Swapping a Gen V LT engine into a classic 1967 to 1969 F body Camaro or Firebird requires an exact mounting solution and robust support structure. The 1967 to 1969 F body LT Conversion Kit ensures that engine and transmission alignment match factory geometry while eliminating the guesswork of custom fabrication. It includes detailed brackets reinforced crossmember and hardened fasteners engineered in the USA by MuscleRods so installers can achieve a direct bolt in solution that preserves chassis integrity and simplifies complex swaps.
Precision Engine Mounts Preserving F-body Geometry
The cast engine mounts in this LT conversion kit replicate the original 1967–1969 Camaro and Firebird mounting points with exacting accuracy. By matching the stock frame rail locations, these mounts maintain suspension geometry and help prevent undue stress on the chassis during acceleration or cornering. The dense cast material absorbs vibration and resists fatigue, contributing to a smooth ride and long component life. Additionally, the design clears the hood line when paired with an optional cast aluminum oil pan, ensuring fitment without last-minute tweaks. Built to strict US standards, these mounts deliver consistent alignment and performance for serious enthusiasts.
Robust Steel Crossmember for Sturdy Powertrain Support
This conversion kit includes a heavy gauge steel crossmember engineered to anchor modern LT series engines firmly in place. Constructed from thick plate with precise bend radii, it withstands high torque loads without bending or warping, preserving driveline alignment under load. Factory bolt locations are retained so both 4L60E and 4L80E transmissions install directly without frame modifications or tunnel trimming. The rigid structure works in concert with dedicated crossmember brackets to distribute forces evenly across the frame rails. Installers value the no-guesswork approach, as every hole lines up for a clean, accurate fit.
Comprehensive Wiring Harness and Cooling Integration
This kit's wiring harness features pre-labeled connectors for sensors, ignition coils, and the EFI module, eliminating the need to splice into the original loom or hunt down obscure terminals. A complete set of cooling system components pairs with performance exhaust headers to ensure proper temperature regulation and a refined exhaust note. By routing and bundling cables ahead of time, the harness reduces installation time and minimizes the risk of errors. Every connector is engineered to factory tolerances, providing a reliable link between modern engine electronics and classic vehicle wiring. The included hardware kit covers every fastener needed, so installers can focus on tuning rather than hunting parts.
Broad Compatibility with Gen V LT Engines and GM Transmissions
Designed to accept LT1, LT4, L83, and L86 engines, this swap kit works seamlessly when combined with a cast aluminum oil pan and the correct intake for hood clearance. It also accommodates the popular 4L60E and 4L80E transmissions without requiring any tunnel modifications, preserving interior space and factory floor pan integrity. This wide compatibility gives builders the freedom to choose powertrain combinations that suit their performance goals while retaining the classic F-body appearance. By maintaining original chassis lines and service access, the kit ensures a straightforward installation process and reliable operation for years of driving enjoyment.
Count on MuscleRods precision and durability. To access a more robust kit where you can build this same kit but this is a customizable kit where the user can select their own parts to better suit their needs, consider our Complete LT Swap Kits - LT Kit Builder.