1953-1954 Chevy EFI Stock Capacity Fuel Tank Kit with 255 LPH Pump
When dropping an LS or LT powerplant into a 1953 to 1954 Chevy chassis you need a fuel setup that installs without alteration and delivers steady flow at wide open throttle. This stock capacity EFI tank for 1953 to 1954 Chevy models drops into the factory fill location with no frame rail modifications and pairs a 255 LPH Walbro module with a sending unit, filler neck, vent filter and all gaskets. Its powder coated steel shell resists corrosion and road debris while immersion cooling keeps the pump quieter under load and supports engine outputs up to 550 horsepower. Together these components ensure EFI fuel delivery remains consistent from idle to full throttle so you can focus on tuning rather than chasing pressure drops.
Corrosion Resistant Steel Shell for Lasting Performance
The fuel tank's powder coated steel construction shields the assembly from rust and road debris, preserving the original capacity and contour of the 1953-1954 Chevy underbody. By resisting pitting and surface damage, the shell maintains fuel quality and reduces the risk of contaminants entering the EFI system. Its robust design also withstands vibration and impacts encountered during spirited driving or daily use, ensuring the tank holds up under varying road conditions. As a result, you retain the classic appearance of the chassis while benefiting from modern protection against environmental hazards and wear.
Walbro 255 LPH Module Ensuring Steady Fuel Delivery
At the heart of the kit is the in-tank Walbro pump module rated for up to 550 horsepower, which delivers a consistent 255 liters per hour even when the engine is pushed to its limit. Immersion cooling provided by surrounding fuel reduces thermal stress on the pump motor, extending service life and damping noise for a quieter cabin environment. By resisting pressure fluctuations during cornering or rapid throttle transitions, the module prevents fuel starvation and supports precise tuning of the engine control unit. This steadiness in flow and pressure is essential for EFI systems to maintain optimal air-fuel ratios across all operating conditions.
Precision Fitment for 1953 1954 Chevy Chassis Integration
Engineered for exact alignment with the original fill location, the tank drops into place without any frame rail alterations or custom bracket fabrication. All mounting points correspond to the factory attachment features, preserving ground clearance and the vehicle's iconic stance. Fuel lines and wiring harnesses follow the stock routing paths, simplifying the connection to your existing EFI harness. This precise fit cuts down on trial-and-error adjustments and eliminates the need for additional filler neck modifications, allowing installers to focus on calibration rather than fitment challenges.
Complete Kit Configuration Streamlines Installation Process
The kit includes every component needed for a seamless swap: a high-flow pump, in-tank module, sending unit, tank straps, filler neck, vent filter, gaskets and mounting hardware. A clear assembly guide walks through each stage of installation, from tank removal to wiring the pump module, so even those with limited EFI experience can proceed with confidence. By providing all parts in one package, it removes the hassle of mismatched fittings and repeated trips to the parts store. Installers can therefore complete the fuel system integration in a single session and move directly to engine tuning and road testing.
Rely on MuscleRods for dependable fuel delivery and explore our 1953-1954 Chevy EFI Fuel Tank Kit - Stock Capacity - 400 LPH Pump as the same item but the 400 LPH pump tank kit which offers more horsepower.