1953-1954 Chevy EFI Fuel Tank Kit with 255 LPH Stock Capacity Pump
Swapping an LS or LT engine into a 1953 to 1954 Chevy chassis demands reliable fuel flow and this EFI Fuel Tank Kit with 255 LPH pump meets that requirement by installing in the factory fill location with no frame rail modifications. Each assembly pairs a Walbro module rated for up to 550 horsepower with a sending unit, filler neck, vent filter and all gaskets and hardware needed to integrate your EFI harness without guesswork. Its powder coated steel shell resists rust and road debris, preserving original capacity and shape for both daily drives and spirited runs while EFI fuel delivery stays consistent under heavy throttle, letting you focus on precise engine calibration.
Chassis Conformity for 1953 1954 Chevy Underbody
The EFI fuel tank kit is engineered to fit precisely in the original 1953 1954 Chevrolet fill location with no frame rail modifications. All mounting points line up with the factory brackets, preserving ground clearance and the vehicle's classic stance. Fuel hoses and wiring harnesses follow the original routing paths, making integration with modern EFI systems straightforward. This tailored fit reduces fabrication time and eliminates the need for custom brackets or filler neck alterations. As a result, installation remains focused on calibration rather than endless fitment adjustments.
Integrated Fuel Sensing and Ventilation
The kit's internal sending unit and vent filter work together to maintain accurate fuel level monitoring and proper tank pressurization. The sending float attaches directly to the module, providing the engine control unit with real time data for fuel trims and idle stability. Meanwhile, the vent filter promotes smooth air exchange during fill and discharge, reducing pressure spikes and preventing vapor lock under heavy loads. This integrated system ensures the ECU always operates with reliable inputs, aiding in tuned performance and consistent engine response across varying driving conditions.
Walbro Pump Dynamics for Sustained Power Demands
The in-tank 255 LPH Walbro module is rated to support engine output up to 550 horsepower, making it suitable for moderate to powerful LS or LT swaps. Immersion in fuel keeps the pump cooler during extended high rpm operation, while the surrounding fluid dampens noise and vibration for a quieter cabin. The consistent delivery at a precise flow rate prevents fuel starvation when exiting corners or during rapid throttle changes. This dependable module simplifies tuning by maintaining stable fuel pressure across a wide range of engine speeds.
Comprehensive Component Integration for Streamlined Installation
Beyond the pump and module, this kit includes a filler neck, gaskets and all required hardware to complete the installation with minimal parts hunting. Each tank strap and bracket is matched to the steel shell, and the included guide walks through the process in a clear step by step format. By supplying every necessary component in a single package, the kit minimizes trips to the parts store and reduces the risk of mismatched fittings. Installers can therefore focus on calibrating the fuel system rather than tracking down connectors or seals.
Rely on precise fitment and steady fuel delivery and for greater output consider the same item but the 400 LPH pump tank kit which offers more horsepower via our 1953-1954 Chevy EFI Fuel Tank Kit - Stock Capacity - 400 LPH Pump.