Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

Fuel Pump and Fitting Kit (C4 Corvette) - 340 LPH


Fuel Pump and Fitting Kit (C4 Corvette) - 340 LPH
Purchase Fuel Pump and Fitting Kit (C4 Corvette) - 340 LPH
  • Fuel Pump and Fitting Kit (C4 Corvette) - 340 LPH

  • $279.00

    SKU: 425-6601-06

Direct-Fit 340 LPH LS Fuel Pump for C4 Corvette

Corvette-specific fittings ensure a drop-in installation for reliable 340 LPH flow in your LS-powered C4, eliminating cuts or extra adapters. Made in the USA from corrosion resistant materials, the kit maintains consistent performance and supports future turbo or supercharger upgrades without a pump swap.

340 LPH LS Fuel Pump and Fitting Kit for C4 Corvette

If your C4 Corvette now houses an LS engine and the stock fuel supply struggles to maintain pressure under load the Fuel Pump and Fitting Kit (C4 Corvette) - 340 LPH steps in to maintain a steady 340 liters per hour through Corvette specific connectors for a true drop in system. The included 340 LPH pump pairs with precision machined fittings that thread into the factory EFI sending unit without cutting or extra adapters. Machined from ethanol safe alloys this kit retains factory clearances and resists internal wear over time while supporting turbo or supercharger installations without another pump change.

Seamless Integration with C4 Corvette Fuel System

This kit uses Corvette specific fittings that thread directly into the factory EFI sending unit, allowing each component to drop into the stock fuel line without cutting or extra adapters. By preserving the original routing, the design maintains factory clearances under the chassis and reduces potential leak points at connection joints. Installers benefit from clear step by step instructions that ensure each fitting is torqued to specification and sealed precisely for reliable performance. The result is a straight-forward swap that minimizes alignment issues commonly encountered with LS engine conversions.

Corrosion Resistant Alloy Construction

All fittings and hardware are manufactured in the USA from alloys chosen for their resistance to ethanol blends and chemical exposure. These materials prevent pitting and internal degradation that can impair flow and damage pump internals over time. By keeping contaminants at bay, the corrosion resistance maintains consistent pressure and protects the in-tank pump from premature wear. This robust build ensures dependable operation across varied driving conditions and fuel formulations.

Consistent 340 LPH Flow for Forced Induction Readiness

The Aeromotive 340 LPH in-tank pump provides ample flow capacity to meet the demands of an LS engine and still leave headroom for future turbocharger or supercharger setups. Maintaining steady pressure during high-RPM bursts prevents lean conditions that could harm engine components or degrade performance. Consistent fuel delivery under load also sharpens throttle response and stabilizes air-fuel ratios during spirited driving. With this built-in capacity, there is no need for another pump upgrade when boosting power levels.

Engineered for reliable LS fuel delivery and drop in fitment on your C4 Corvette.

Specifications

  • SKU: 425-6601-06
  • Swap Engine: LS
  • Brand: Muscle Rods
  • What's Included:
    • Aeromotive 340 LPH in-tank fuel pump
    • Fittings needed to hook to our fuel line kit

Key Features

  • Corvette-specific fittings for the EFI sending unit
  • High-capacity flow headroom
  • Made in the USA with corrosion-resistant materials

Benefits

  • Drops straight into factory lines, no cutting or extra adapters
  • Supports future turbo or super-charger upgrades without another pump swap
  • Consistent build quality and long-term reliability

This Item Assigned to Category and Also Fits:

Description

340 LPH LS Fuel Pump and Fitting Kit for C4 Corvette

If your C4 Corvette now houses an LS engine and the stock fuel supply struggles to maintain pressure under load the Fuel Pump and Fitting Kit (C4 Corvette) - 340 LPH steps in to maintain a steady 340 liters per hour through Corvette specific connectors for a true drop in system. The included 340 LPH pump pairs with precision machined fittings that thread into the factory EFI sending unit without cutting or extra adapters. Machined from ethanol safe alloys this kit retains factory clearances and resists internal wear over time while supporting turbo or supercharger installations without another pump change.

Seamless Integration with C4 Corvette Fuel System

This kit uses Corvette specific fittings that thread directly into the factory EFI sending unit, allowing each component to drop into the stock fuel line without cutting or extra adapters. By preserving the original routing, the design maintains factory clearances under the chassis and reduces potential leak points at connection joints. Installers benefit from clear step by step instructions that ensure each fitting is torqued to specification and sealed precisely for reliable performance. The result is a straight-forward swap that minimizes alignment issues commonly encountered with LS engine conversions.

Corrosion Resistant Alloy Construction

All fittings and hardware are manufactured in the USA from alloys chosen for their resistance to ethanol blends and chemical exposure. These materials prevent pitting and internal degradation that can impair flow and damage pump internals over time. By keeping contaminants at bay, the corrosion resistance maintains consistent pressure and protects the in-tank pump from premature wear. This robust build ensures dependable operation across varied driving conditions and fuel formulations.

Consistent 340 LPH Flow for Forced Induction Readiness

The Aeromotive 340 LPH in-tank pump provides ample flow capacity to meet the demands of an LS engine and still leave headroom for future turbocharger or supercharger setups. Maintaining steady pressure during high-RPM bursts prevents lean conditions that could harm engine components or degrade performance. Consistent fuel delivery under load also sharpens throttle response and stabilizes air-fuel ratios during spirited driving. With this built-in capacity, there is no need for another pump upgrade when boosting power levels.

Engineered for reliable LS fuel delivery and drop in fitment on your C4 Corvette.

Features
  • Corvette-specific fittings for the EFI sending unit
  • High-capacity flow headroom
  • Made in the USA with corrosion-resistant materials
Benefits
  • Drops straight into factory lines, no cutting or extra adapters
  • Supports future turbo or super-charger upgrades without another pump swap
  • Consistent build quality and long-term reliability
What's Included
  • Aeromotive 340 LPH in-tank fuel pump
  • Fittings needed to hook to our fuel line kit
Specifications
  • SKU: 425-6601-06
  • Brand: Muscle Rods
  • Swap Engine: LS