Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

1974-1977 Vega EFI Fuel Tank Kit - 255 LPH Pump


1974-1977 Vega EFI Fuel Tank Kit - 255 LPH Pump
Purchase 1974-1977 Vega EFI Fuel Tank Kit - 255 LPH Pump
  • 1974-1977 Vega EFI Fuel Tank Kit - 255 LPH Pump

  • $586.00

    SKU: 108-6680-04

19 Gallon EFI Tank with 255 LPH Pump for 1974-1977 Vega

Built from powder coated galvanized steel, the 19 gallon EFI fuel tank resists corrosion and preserves authentic Vega styling while the 255 LPH Walbro pump maintains consistent flow for engines up to 550 hp. Its generous capacity extends driving range to minimize refueling stops, and the precise pump output smooths throttle response for improved drivability under demanding conditions while retaining factory fit integration for straightforward installation.

EFI Fuel Tank Kit with 255 LPH Pump for 1974-1977 Chevy Vega

Swapping an LS or LT engine into a classic Vega requires a fuel system that matches its output and this EFI tank kit pairs a 255 LPH Walbro pump with a corrosion-resistant steel reservoir built for 1974 to 1977 underbody mounts. By relocating the pump module inside the tank, this assembly holds steady pressure, shortens fuel line runs, and cuts vapor lock risk during spirited driving. Featuring a 19 gallon capacity and silver coated galvanized finish, the reservoir extends driving range while preserving Vega undercarriage lines and fending off corrosion. Completing the kit are the OEM style sending unit, vent filter, gaskets, and full mounting hardware so installers have every piece needed for a clean EFI conversion on a 1974 to 1977 Vega.

Precision Fuel Delivery for High Output Engines

The 255 LPH Walbro pump is engineered to support engines up to 550 horsepower while maintaining consistent pressure under rapid throttle changes. By positioning the pump inside the fuel tank, the assembly keeps fuel cooler and minimizes air entrapment that can cause vapor lock during spirited runs. Shorter fuel line routing from the tank to the engine ensures immediate response to driver input and uniform flow at all engine speeds. As a result, this configuration preserves calibration accuracy for reliable fuel metering even under the most demanding conditions.

Corrosion Protection with Galvanized Steel and Silver Finish

The tank body is formed from steel that has undergone a galvanizing process, creating a zinc barrier against rust and corrosion. A silver powder coat is then applied to seal the surface, delivering resistance to road salts and moisture that can mar undercarriage components. This dual treatment bonds tightly to the steel, reducing the chance of chips or scratches exposing bare metal. Together, these layers ensure the reservoir maintains its appearance and structural integrity for years beneath a classic Vega.

Integrated Module Design Simplifies EFI Conversion

This kit combines the pump, sending unit, vent filter and filler neck into a single assembly that aligns with factory underbody mounting points on 1974–1977 Vegas. All necessary straps, gaskets and hardware are included to eliminate the need for aftermarket modifications or custom brackets. The original equipment style sending unit preserves accurate fuel level readings without altering the dash cluster. By grouping components into one cohesive module, installers can complete the swap more efficiently and avoid compatibility issues that arise from mixing parts.

Large Capacity Tank Enhancing Range and Consistent Flow

With nineteen gallons of capacity, the tank extends driving range for long cruises or track sessions and reduces the frequency of refueling stops. Internal baffling controls fuel movement, preventing starved pump pickup during hard cornering or rapid acceleration. This stability maintains uninterrupted flow, which translates to smoother acceleration and precise throttle response. Whether tackling a winding back road or embarking on a cross-country journey, drivers benefit from both endurance and performance assurance.

Engineered for reliable operation in spirited driving conditions. For the same tank but with a larger capacity pump at 400 LPH see our 1974-1977 Vega EFI Fuel Tank Kit - 400 LPH Pump.

Fitment

  • 1974-1977 Chevy Vega

Specifications

  • SKU: 108-6680-04
  • Brand: Muscle Rods
  • What's Included:
    • 255 LPH Walbro fuel pump (up to 550 HP)
    • In-tank tuel pump module
    • Sending unit
    • Tank straps
    • Filler neck
    • Vent filter
    • Gaskets
    • Hardware

Key Features

  • High-performance 255 LPH Walbro fuel pump supports up to 550 hp
  • Coated galvanized steel tank with powder-coated silver finish
  • OEM-style appearance preserves classic Vega aesthetics
  • 19-gallon fuel capacity for extended driving range
  • Optimizes fuel flow for smoother acceleration and efficiency

Benefits

  • Ensures reliable fuel delivery for high-horsepower engines under demanding conditions
  • Provides corrosion-resistant construction and a sleek silver finish for longevity
  • Maintains authentic Vega styling for a seamless classic appearance
  • Offers 19-gallon capacity to extend driving range and reduce refueling stops
  • Optimizes fuel flow for smooth throttle response and enhanced efficiency

This Item Assigned to Category and Also Fits:

Description

EFI Fuel Tank Kit with 255 LPH Pump for 1974-1977 Chevy Vega

Swapping an LS or LT engine into a classic Vega requires a fuel system that matches its output and this EFI tank kit pairs a 255 LPH Walbro pump with a corrosion-resistant steel reservoir built for 1974 to 1977 underbody mounts. By relocating the pump module inside the tank, this assembly holds steady pressure, shortens fuel line runs, and cuts vapor lock risk during spirited driving. Featuring a 19 gallon capacity and silver coated galvanized finish, the reservoir extends driving range while preserving Vega undercarriage lines and fending off corrosion. Completing the kit are the OEM style sending unit, vent filter, gaskets, and full mounting hardware so installers have every piece needed for a clean EFI conversion on a 1974 to 1977 Vega.

Precision Fuel Delivery for High Output Engines

The 255 LPH Walbro pump is engineered to support engines up to 550 horsepower while maintaining consistent pressure under rapid throttle changes. By positioning the pump inside the fuel tank, the assembly keeps fuel cooler and minimizes air entrapment that can cause vapor lock during spirited runs. Shorter fuel line routing from the tank to the engine ensures immediate response to driver input and uniform flow at all engine speeds. As a result, this configuration preserves calibration accuracy for reliable fuel metering even under the most demanding conditions.

Corrosion Protection with Galvanized Steel and Silver Finish

The tank body is formed from steel that has undergone a galvanizing process, creating a zinc barrier against rust and corrosion. A silver powder coat is then applied to seal the surface, delivering resistance to road salts and moisture that can mar undercarriage components. This dual treatment bonds tightly to the steel, reducing the chance of chips or scratches exposing bare metal. Together, these layers ensure the reservoir maintains its appearance and structural integrity for years beneath a classic Vega.

Integrated Module Design Simplifies EFI Conversion

This kit combines the pump, sending unit, vent filter and filler neck into a single assembly that aligns with factory underbody mounting points on 1974–1977 Vegas. All necessary straps, gaskets and hardware are included to eliminate the need for aftermarket modifications or custom brackets. The original equipment style sending unit preserves accurate fuel level readings without altering the dash cluster. By grouping components into one cohesive module, installers can complete the swap more efficiently and avoid compatibility issues that arise from mixing parts.

Large Capacity Tank Enhancing Range and Consistent Flow

With nineteen gallons of capacity, the tank extends driving range for long cruises or track sessions and reduces the frequency of refueling stops. Internal baffling controls fuel movement, preventing starved pump pickup during hard cornering or rapid acceleration. This stability maintains uninterrupted flow, which translates to smoother acceleration and precise throttle response. Whether tackling a winding back road or embarking on a cross-country journey, drivers benefit from both endurance and performance assurance.

Engineered for reliable operation in spirited driving conditions. For the same tank but with a larger capacity pump at 400 LPH see our 1974-1977 Vega EFI Fuel Tank Kit - 400 LPH Pump.

Fitment

Fitment

  • 1974-1977 Chevy Vega
Features
  • High-performance 255 LPH Walbro fuel pump supports up to 550 hp
  • Coated galvanized steel tank with powder-coated silver finish
  • OEM-style appearance preserves classic Vega aesthetics
  • 19-gallon fuel capacity for extended driving range
  • Optimizes fuel flow for smoother acceleration and efficiency
Benefits
  • Ensures reliable fuel delivery for high-horsepower engines under demanding conditions
  • Provides corrosion-resistant construction and a sleek silver finish for longevity
  • Maintains authentic Vega styling for a seamless classic appearance
  • Offers 19-gallon capacity to extend driving range and reduce refueling stops
  • Optimizes fuel flow for smooth throttle response and enhanced efficiency
What's Included
  • 255 LPH Walbro fuel pump (up to 550 HP)
  • In-tank tuel pump module
  • Sending unit
  • Tank straps
  • Filler neck
  • Vent filter
  • Gaskets
  • Hardware
Specifications
  • SKU: 108-6680-04
  • Brand: Muscle Rods