Filters

Secure Checkout
BRP Hot Rods - The Pro's Choice for LS & LT Swap Kits and Swap Parts!
Your Shopping Cart Is Empty

Coil Kit - Passenger Side - Horizontal Mounted Coils


Coil Kit - Passenger Side - Horizontal Mounted Coils
Purchase Coil Kit - Passenger Side - Horizontal Mounted Coils
  • Coil Kit - Passenger Side - Horizontal Mounted Coils

  • $99.95

LS-Ready Passenger-Side Horizontal Coil Mount

Robust steel construction forms the backbone of this coil mount, relocating coils three inches to clear brake boosters and air conditioning while streamlining your engine bay. Precision positioning enhances heat dissipation for reliable performance under stress, fits GM vehicles from 1955 to 2005, and reflects American craftsmanship for lasting quality.

Passenger Side Horizontal Coil Mount for LS Engine Swaps

This passenger side coil kit for LS engine swaps addresses tight clearance issues by relocating ignition coils to the far side of the engine in a horizontal mounting layout that frees space for brake boosters and air conditioning lines. Its sturdy steel bracket pushes the coil three inches forward and holds it firmly under heavy loads. Integral positioning improves airflow around the coil for better heat removal and it fits nearly every GM model from 1955 to 2005.

Heavy Duty Steel Bracket Ensures Coil Stability

The coil kit's steel bracket is engineered to handle the rigorous demands of LS swap environments. Crafted from robust steel, it resists flex and vibration that can compromise ignition timing under high pressure driving conditions. Its precise weld points and reinforced mounting surfaces maintain coil alignment even during rapid acceleration or track use. By securing the coil three inches forward, this bracket design delivers a level of support that protects wiring integrity and component life.

Horizontal Coil Layout Frees Up Engine Bay Space

The horizontal mounting orientation addresses one of the most common challenges in LS conversions: tight clearance near brake boosters and air conditioning lines. By rotating the coil into a flat profile on the passenger side, this design liberates vertical and lateral space for auxiliary systems. Technicians gain easier access to service points, while custom builders can route hoses and wiring without compromise. This streamlined layout translates into cleaner installations and faster assembly times.

Optimized Coil Position for Enhanced Heat Management

Positioning the coil three inches forward not only clears obstructions but also improves airflow around the ignition assembly. Increased air circulation around the coil reduces heat soak, which is critical for sustaining consistent spark energy during extended operation. Cooler coil temperatures help maintain voltage stability and protect internal insulation from premature aging. The result is more reliable ignition output and reduced risk of misfires under sustained load.

This coil mount delivers consistent ignition performance for your LS swap.

Specifications

  • SKU: 000-6004-16
  • Swap Engine: LS
  • Brand: Muscle Rods
  • What's Included:
    • Heavy-Duty Steel Bracket
    • All Required Installation Hardware
    • Extended Spark Plug Wire

Key Features

  • Relocates coil 3 inches to clear brake boosters and air conditioning
  • Heavy-duty steel bracket engineered for high-performance stability
  • Horizontal coil mount streamlines engine bay appearance
  • Optimized coil positioning enhances heat dissipation and performance
  • Broad compatibility with GM vehicles from 1955 to 2005
  • Proudly manufactured in the USA

Benefits

  • Ensures seamless brake booster and AC installation without fitment issues
  • Provides superior coil support during high-pressure driving conditions
  • Creates a sleek, streamlined engine bay look
  • Improves heat management for consistent performance under stress
  • Fits a wide range of GM models from 1955-2005
  • Guarantees American craftsmanship with reliable, high-quality construction

This Item Assigned to Category and Also Fits:

Description

Passenger Side Horizontal Coil Mount for LS Engine Swaps

This passenger side coil kit for LS engine swaps addresses tight clearance issues by relocating ignition coils to the far side of the engine in a horizontal mounting layout that frees space for brake boosters and air conditioning lines. Its sturdy steel bracket pushes the coil three inches forward and holds it firmly under heavy loads. Integral positioning improves airflow around the coil for better heat removal and it fits nearly every GM model from 1955 to 2005.

Heavy Duty Steel Bracket Ensures Coil Stability

The coil kit's steel bracket is engineered to handle the rigorous demands of LS swap environments. Crafted from robust steel, it resists flex and vibration that can compromise ignition timing under high pressure driving conditions. Its precise weld points and reinforced mounting surfaces maintain coil alignment even during rapid acceleration or track use. By securing the coil three inches forward, this bracket design delivers a level of support that protects wiring integrity and component life.

Horizontal Coil Layout Frees Up Engine Bay Space

The horizontal mounting orientation addresses one of the most common challenges in LS conversions: tight clearance near brake boosters and air conditioning lines. By rotating the coil into a flat profile on the passenger side, this design liberates vertical and lateral space for auxiliary systems. Technicians gain easier access to service points, while custom builders can route hoses and wiring without compromise. This streamlined layout translates into cleaner installations and faster assembly times.

Optimized Coil Position for Enhanced Heat Management

Positioning the coil three inches forward not only clears obstructions but also improves airflow around the ignition assembly. Increased air circulation around the coil reduces heat soak, which is critical for sustaining consistent spark energy during extended operation. Cooler coil temperatures help maintain voltage stability and protect internal insulation from premature aging. The result is more reliable ignition output and reduced risk of misfires under sustained load.

This coil mount delivers consistent ignition performance for your LS swap.

Features
  • Relocates coil 3 inches to clear brake boosters and air conditioning
  • Heavy-duty steel bracket engineered for high-performance stability
  • Horizontal coil mount streamlines engine bay appearance
  • Optimized coil positioning enhances heat dissipation and performance
  • Broad compatibility with GM vehicles from 1955 to 2005
  • Proudly manufactured in the USA
Benefits
  • Ensures seamless brake booster and AC installation without fitment issues
  • Provides superior coil support during high-pressure driving conditions
  • Creates a sleek, streamlined engine bay look
  • Improves heat management for consistent performance under stress
  • Fits a wide range of GM models from 1955-2005
  • Guarantees American craftsmanship with reliable, high-quality construction
What's Included
  • Heavy-Duty Steel Bracket
  • All Required Installation Hardware
  • Extended Spark Plug Wire
Specifications
  • SKU: 000-6004-16
  • Brand: Muscle Rods
  • Swap Engine: LS