1970-1981 F-Body LS Conversion
This LS swap kit is made specifically for 1970-1981 Camaros and Firebirds. The center of this conversion is our engine mounts and crossmember kit. This mount kit includes new frame brackets that bolt into existing holes in the subframe. It was designed around our 98-02 f-body GM oil pan. Unlike most LS swap parts on the market everything here was made to work together, so you'll have clean mounting of your engine and not a mix of unrelated parts. Our engine mounts position the engine so there is no steering interference, and our crossmember maintains the proper drive-line angle. There are many options to complete this conversion including, oil pans, headers, fuel system, cooling, front accessories, and wiring. Simply scroll down through the following part groups to see all that we offer for an easy, strong, and clean installation of your LS engine.
LS Series Swap
Everything here is made specifically for your car
No generic hope-it-fits parts here. Everything was developed on a real project car for the best possible fit.
Sold separately so you get what you need.
For 2014+ LT Series
206-0102-56 LS and T-56 or TR-6060*
206-0102-60 LS and 4L60E to 4L70E
206-0102-80 LS and 4L80E or 4L85E
206-0102-89 LS and 6L80E or 8L90E*
206-0102-40 LS and TH400
206-0102-35 LS and PG,TH350 or 4spd
206-0002-56 LS and T-56 or TR-6060*
206-0002-60 LS and 4L60E to 4L70E
206-0002-80 LS and 4L80E or 4L85E
206-0002-89 LS and 6L80E or 8L90E*
206-0002-40 LS and TH400
206-0002-35 LS and PG,TH350 or 4spd
Mount and Crossmember Kit
Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware. Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings. It has a lifetime free replacement warranty on the bushings. $489.00
*The TR-6060 and 8L90E will require the use of one of the late model transmission mount adapters listed below
For those of you working on custom applications, or just adding an overdrive transmission to your existing engine, we offer our engine mounts and Sure-Fit crossmember separately. To ensure proper driveline angle we recommend getting the Mount and Crossmember kit together for standard LS swaps.
1975-81 Late Style
1970-74 Early Style
Early or Late Subframe?
Measure your subframe
Since late subframes can be used in early cars with simple modifications it is important to measure yours. The center of the rear body mount to the back crossmember mounting hole. 1970-74 subframes are roughly 7” while 1975-81 subframes are 10” or more.
Late Model Transmission Mount Adapters
We have adapter brackets available for those of you using Camaro TR-6060 or CTS-V T-56 manual transmissions and CTS-V 6L80E or 8L90E automatics. Click here for more info.
Solid Race Bushings
Also available are solid race bushings for our engine mounts.
F-body Oil Pan
The oil pan our kit was designed around. New and used when available. Includes windage tray, pickup tube, hardware, and gasket.
Click here for oil pan install article
Our oil pan kits come with our exclusive pickup tube girdle.
BRP Oil Pump Pickup Tube Girdle
Original GM oil pickup tubes are fastened to the pump with a single bolt mating flange on the tube. The bolt hole on the other side is not used. Our Girdle is cnc machined aluminum and goes over the original mating flange, wraps around the tube, and fastens using both bolt holes. Use with a little Locktight and it’s cheap insurance against an engine meltdown. It comes with two longer bolts for install.
MR45126 1 ¾” ceramic coated mid-length headers $569.00
MR45136 1 ¾” ceramic coated long tube headers $749.00
MR45156 1 7/8” ceramic coated long tube headers $799.00
MR45176 2” ceramic coated long tube headers $899.00
MR45146 1 ¾” stepped to 1 7/8” ceramic coated long tube $949.00
MR45166 1 7/8” stepped to 2” ceramic coated long tube $999.00
MuscleRods Ceramic Coated Headers
Our ceramic-coated headers offer many features that are normally only found on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. The mid-length headers use a gasket-less ball and socket type collector for a leak free install. The long tubes feature a slip-fit collector that when used in conjunction with band clamps offer great ground clearance .We offer several sizes so you can match them to your horsepower level. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs. Standard ceramic finish is polished silver, contact us for bare steel and black ceramic coated pricing.
Our stainless mid-length headers have 1 7/8” primaries with 3" 4-bolt collectors making great power for their compact size.
Smooth bends and transitions in 304 stainless steel.
All of our stainless headers feature a collector merge-spike that creates a smooth transition from the primary tube into the collector. It reduces low pressure turbulence increasing the scavenging effect of the cylinders thus increasing flow and power output.
MuscleRods Stainless Steel Headers
We have found that 1 7/8" is the best size header for most LS swaps. So, we now offer a 1 7/8" long-tube and mid-length header in stainless steel specifically for this LS swap. These headers feature 3/8" flanges and very smooths bends that create a great raw stainless look. The 304 Stainless steel ensures maintenance-free longevity. The long-tubes feature a slip-fit collector that when used with stainless steel band clamps offer the best ground clearance in the industry. The collector merge-spike increases power in both the mid-length and long-tube. They include gaskets, bolts, and O2 sensor bungs.
206-6795 1 7/8” Stainless Steel long-tube headers $1049.00
206-6794 1 7/8” Stainless Steel mid-length headers $899.00
We have Stainless band clamps and header bolts along with reducer cones to help you complete your exhaust system. Click here for more info.
EFI In-Tank Pump Fuel Tanks kits
These conversion fuel tanks solve the problem of supplying your new LS engine with a steady flow of fuel. The tanks, made specifically for your car, feature a recessed area in the top for the fuel pump module and sending unit, so no floor modifications are needed for clearance. They have an innovative baffling system inside to control fuel slosh and keep the pump fed even at low fuel levels and extreme driving conditions. They are galvanized steel and powder coated silver for maximum durability. The kit includes a fuel sending unit designed to work with your factory style fuel gauge. The included fuel pump module features an in-tank wiring harness and three ports - one for the feed line, one for the return line, and one for the vent. The kit has two available Walbro fuel pump options. The standard 255 LPH pump or the 400 LPH pump for supercharged or 550+hp applications. The kit also includes tank straps, vent filter, gaskets, and hardware. They look like original equipment from under the car and are absolutely the best way to go when converting to EFI.
206-6680-04 70-73 Camaro/Firebird Tank kit - 255 LPH pump $549.00
206-6680-06 70-73 Camaro/Firebird Tank kit - 400 LPH pump $629.00
206-6681-04 74-77 Camaro/ 74-78 Firebird Tank kit - 255 LPH pump $569.00
206-6681-06 74-77 Camaro/ 74-78 Firebird Tank kit - 400 LPH pump $649.00
206-6682-04 78-81 Camaro/ 79-81 Firebird Tank kit - 255 LPH pump $569.00
206-6682-06 78-81 Camaro/ 79-81 Firebird Tank kit - 400 LPH pump $649.00
Fuel Line and Regulator Kit
Our quick and easy complete fuel line systems includes everything needed to go from the fuel tank to the LS fuel rail. Includes P.T.F.E. braided and covered fuel line, an OE style fuel filter/regulator combo, line clamps, and all fittings and connectors needed. Standard kit is for 255 LPH pumps with a 400 LPH version also available. Click for more info.
LS Conversion Intake Manifold kits
These kits includes everything you need to swap out your original intake to a fabricated aluminum, high-flow intake and convert to a larger cable-controlled throttle body. These are a great option for those using a truck pull-out package.
LS Conversion Radiators
We now offer conversion radiators specifically designed for your car with an LS engine. They feature all aluminum construction, but unlike others on the market, they have beautifully stamped tanks with strengthening indentations just like your original. They're a double pass design putting the inlet and outlet on the same side which greatly simplifies plumbing to the engine. The all important steam port bung is welded into the upper part of the tank which lets your new LS engine vent properly. They also include a sensor port that can be used for a coolant temp fan switch. Excellent restoration type quality made in the USA. Available in bare aluminum or black.
313-9005-0M 70-81 Camaro LS Radiator (Manual trans) $609.00
313-9005-0A 70-81 Camaro LS Radiator (Auto trans) $639.00
313-9021-0M 70-81 Firebird LS Radiator (Manual trans) $609.00
313-9021-0A 70-81 Firebird LS Radiator (Auto trans) $639.00
Radiators with Cooling fans
313-9005-MF 70-81 Camaro LS Radiator (Manual trans) with fans $965.00
313-9005-AF 70-81 Camaro LS Radiator (Auto trans) with fans $995.00
313-9021-MF 70-81 Firebird LS Radiator (Manual trans) with fans $965.00
313-9021-AF 70-81 Firebird LS Radiator (Auto trans) with fans $995.00
Black Epoxy coating
Optional dual high performance fans installed
LS Swap Hoses and Line Kits
Check here for radiator hoses, transmission line and power steering kits to complete your swap.
Coil Relocation Kits and Extreme Race Wires
Muscle Rods Coil Relocation Kits alleviates the problem of the rear coils hitting the power brake booster or air conditioning box when swapping the LS engines into early vehicles. A perfect match to them is our high performance spark plug wires featuring 45° boots. For more info click here.
Wiring Harnesses and Computer
We offer many stand-alone harnesses as well as harness and re-flashed computer packages.
Gauge Components and Sensors
We offer a group of gauge adapters and sensors to get your original gauges working with your late model engine and transmission For more info click here.
Hydraulic Clutch Conversion Kits
This hydraulic clutch conversion kit is a must when installing a T56 (or TR6060) in your earlier vehicle. These easy bolt-in kits get you the great pedal feel of a hydraulic system and years of dependable, maintenance-free use.
LS Front Accessory Drives
Whether you are looking for original equipment style, or full billet custom, we have you covered. We have partial and complete kits in several finishes, that have been tested to work with our other components and your car. Hit the link for more info.
Rear Disc Brake adapter Kit
Our rear disc brake adapter kit allows you to use late model F-body rear brakes on your existing rear end. includes the spacer plates to re-position the backing plates to work with the early 10 & 12 bolt axles.
© 2020 BRP HotRods Inc.