1995-2005 2wd S-10 Blazer LS Conversion
This LS swap kit is for 1995-2005 S-10 2 wheel drive Blazers. It was designed around our GM LH8 oil pan. Unlike most LS swap parts on the market this kit replaces the frame brackets in addition to the mounts so you'll have clean mounting of your engine and not a mix of parts that are weak and don't work together properly. The frame brackets bolts into existing holes in the frame and and locates the engine to give you the most options for front accessories drives. Unlike others, our kit positions the engine so there is no steering interference and maintains the proper drive-line angle for smooth highway cruising. It provides clearance for the factory AC box, power brake booster, and aftermarket suspension components. We also offer our Muscle Rods long tube headers that give unparalleled performance and ground clearance. These combined parts offer an easy, strong, and clean installation of your LS engine. See our installation guide for more info on this LS swap.
Everything here is made specifically for your Truck
No generic hope-it-fits parts here. Everything was developed on a real project truck for the best possible fit.
1995-2005 S-10 Blazer 2wd
Mount and Crossmember Kit
Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware. Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings. Comes with a lifetime free replacement warranty on the bushings. $479.00
For those of you working on custom applications we offer our engine mounts separately. To ensure proper driveline angle we recommend getting the Mount and Crossmember kit together for standard LS swaps.
Late Model Manual Transmission Mount Adapters
We have adapter brackets available for those of you using a TR-6060 or late model T-56 transmission used in the CTS-V and 5th generation Camaros. Click here for more info.
Solid Race Bushings
Also available are solid race bushings for our engine mounts.
Oil Pan kits
The LH8 pan is the oil pan that our LS swap was designed around. It comes standard or machined for the oil bypass valve to use with displacement on demand or variable valve timing. Includes new full length windage tray, pickup tube, hardware, gasket, dipstick, and our pickup tube girdle. We also offer our High Clearance oil pan. Built to our specs by Moroso this High Clearance oil pan is recommended for cars and trucks that have been lowered.
Click here for oil pan install article
000-6100-00 LH8 Oil Pan $249.00
000-6102-00 LH8 Oil Pan (machined for ‘08 up VVT bypass) $329.00
000-6400-00 Moroso High Clearance Oil Pan $469.00
Oil pan kits come with our exclusive pickup tube girdle.
Our High Clearance oil pan will be flush or above the frame and the LH8 will fit like a vintage small or big block and hang a little below.
BRP Oil Pump Pickup Tube Girdle
Original GM oil pickup tubes are fastened to the pump with a single bolt mating flange on the tube. The bolt hole on the other side is not used. Our Girdle is cnc machined aluminum and goes over the original mating flange, wraps around the tube, and fastens using both bolt holes. Use with a little Locktight and it’s cheap insurance against an engine meltdown. It comes with two longer bolts for install.
Muscle Rods Headers
These are not your average swap headers. These headers offer many feature that are normally only on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. These long tube headers feature bolt-on race inspired collectors for ease of installation and tuning of primary length. They're ceramic coated inside and out to fight performance robbing underhood temperatures then polished for a long lasting show quality finish. These 1 ¾” headers run all 4 tubes inside the frame so you can still run wide front tires. If you are interested in larger primary tubes, give us a call. Our "two inside two outside" headers can be used with some frame modifications. They include gaskets, bolts, reducers, and O2 sensor bungs.
We have Stainless band clamps and header bolts along with reducer cones to help you complete your exhaust system. Click here for more info.
Coil Relocation Kits and Extreme Race Wires
Muscle Rods Coil Relocation Kits alleviates the problem of the rear coils hitting the power brake booster or air conditioning box when swapping the LS engines into early vehicles. A perfect match to them is our high performance spark plug wires featuring 45° boots. For more info click here.
Wiring Harnesses with Ready to Run Re-flashed Computer
This is the quickest and easiest way to be running and on the road with your LS project. Includes a new wiring harness that has everything you need and a reflashed OE computer. Just plug it in and start enjoying your new LS swap. For more info click here.
Fuel Line and Regulator Kit
Our quick and easy complete fuel line systems includes everything needed to go from the fuel tank to the LS fuel rail. Includes P.T.F.E. braided and covered fuel line, an OE style fuel filter/regulator combo, line clamps, and all fittings and connectors needed. Click for more info.
LS Front Accessory Drives
Whether you are looking for original equipment style, or full billet custom, we have you covered. We have partial and complete kits in several finishes, that have been tested to work with our other components and your truck. Hit the link for more info.
© 2016 BRP HotRods Inc.